How to Clean Your BERLIY LED Face and Neck Mask
A quick wipe after each session helps keep your BERLIY mask clean for its next use. Pay attention to both the face and neck sections, then let the silicone dry before putting the mask away.
For everyday care, start with a clean, soft, dry towel.
1. Switch off the mask
Turn the mask off and disconnect any charging cable before cleaning. Keep the controller and charging connection dry throughout.
2. Gently wipe the silicone
Wipe the silicone surfaces that touch your skin, working across the face section and down to the neck panel. Check for any visible skincare residue along the way.
Use gentle pressure. Do not rinse the mask under a faucet or immerse it in water.
3. Allow it to dry
Leave the mask in a well-ventilated area until both sections are completely dry. Any moisture left after use should be gone before you return it to its pouch.
4. Put it away in a clean pouch
Store your mask in its dustproof pouch between sessions. Before putting it inside, check that the pouch is clean and dry so it does not transfer dirt or residue back onto the silicone.
Help with stubborn marks and accessories
If a mark remains after gentle wiping, our team can help you decide what to do next. Send us a clear photo and, if you know what caused the residue, the name of the product involved.
For care advice about the straps, eye pieces, or controller, let us know which part you need help with before applying a cleaning product.
No comments
0 comments